Weber Kettle Club Forums
Grill Talk => Weber Grill Forum (Grills, Accessories) => Topic started by: Troy on July 28, 2020, 03:37:16 PM
-
https://www.youtube.com/watch?v=lENP3LkmVek
A couple talking points:
- I couldn't get the leg clips to work. Was I doing something wrong? Pretty sure I followed the instructions.
- Would you file a warranty claim about that lid blemish? I'm bummed about it, but I am going to live with it I think...
-
Hey Troy, sometimes I put the clips in the leg first, then slowly work it in!! Also, I may be the first in Canada to get one, be here tomorrow!! Great video!!! Luv that 22 Glen!!!!
Sent from my SM-G950W using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Clips in legs first works best !!
Sent from my SM-G975U using Tapatalk
-
I have only one kettle with the clips.
Mine are put in the legs before insertion.
Push the button in just as you enter the socket.
Sent from my SM-G960U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
I'll re-install my legs if Weber updates their instructions to put the clips into the legs first! =D
-
Somehow, I’ve never seen one of your videos until this one. Enjoyed it. I’ll watch more!
Super interesting to learn the Glen Blue kettle kinda started it all! I love the history! Just wish I learned this about 4 hours ago prior to my neighbor asking about all the grills on my patio....[emoji23][emoji23]
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Nice vintage glen blue
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Nice video!! $400 for a new Kettle? Yup, I'd file a claim with no guilt at all.
Sent from my Pixel 4 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
You have your computer desk in the garage? Keep working those clips I did it following the instructions.
Sent from my Pixel 3 XL using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Nice video Troy. My first leg clip kettle also. I also put the clips in the socket first. The leg fit tight, and there’s none of that 26” wobble I have on my other 26ers.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I enjoyed the video! Keep them coming!
Sent from my iPhone using Tapatalk
-
Nice video and good explanation of the history of the WKC and how interest in collecting has increased. I agree that the leg pins are the most challenging part of the assembly process. I did get them to pop out of the holes and the legs are surprisingly tight in the sockets. Grill is very stable.
Thanks for all you do and have done for the Weber community!
-
Thanks for the video! I enjoyed seeing a video of the glen blue rather than just images. Can't wait to see the video of your first cook on it.
-
Loved it Troy! I miss seeing these videos from you, they are so well done! To your talking points, I haven’t been able to even put mine together because I can’t get the legs in at all! The angle seems to be off! The lid I would be 50/50 on. Sometimes I think that others are being too picky especially with the bottom of the ash catcher clips but that is a different story than your lid. I actually had to do a lid warranty because the lip of 2 vent holes on mine was raised just enough that I couldn’t rotate the damper at all.
Sent from my iPad using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Loved it Troy! I miss seeing these videos from you, they are so well done! To your talking points, I haven’t been able to even put mine together because I can’t get the legs in at all! The angle seems to be off! The lid I would be 50/50 on. Sometimes I think that others are being too picky especially with the bottom of the ash catcher clips but that is a different story than your lid. I actually had to do a lid warranty because the lip of 2 vent holes on mine was raised just enough that I couldn’t rotate the damper at all.
Sent from my iPad using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
I ended up filing a warranty for the lid. After waking up to it a few times and feeling that sinking gut feeling seeing the blemish, i decided to ask for a replacement.
I registered online and filed the warranty online. Within 3 minutes they emailed confirming a replacement.
I also struggled with getting the legs in!!! I had to bend flat part where the axel goes in to be more spread
Thanks for the words on video, I plan to make more. I love doing it!
-
I ended up filing a warranty for the lid. After waking up to it a few times and feeling that sinking gut feeling seeing the blemish, i decided to ask for a replacement.
I registered online and filed the warranty online. Within 3 minutes they emailed confirming a replacement.
I also struggled with getting the legs in!!! I had to bend flat part where the axel goes in to be more spread
Thanks for the words on video, I plan to make more. I love doing it!
I think you did the right thing with the lid warranty. I also think that I am going to have to do what you did bending the flat part.
Sent from my iPad using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Congratulations Troy. Pretty bad ass WKC banner you got there in the background.
There were 5 local Bay Area guys here in California that all ordered these GB 26er's. Four arrived in perfect condition. Unfortunately, one arrived with shipping damage to the lid. A claim was filed and he was told a new lid will be shipped once inventory is replenished.
-
Congratulations Troy. Pretty bad ass WKC banner you got there in the background.
There were 5 local Bay Area guys here in California that all ordered these GB 26er's. Four arrived in perfect condition. Unfortunately, one arrived with shipping damage to the lid. A claim was filed and he was told a new lid will be shipped once inventory is replenished.
4/5 is refreshing to hear!