Weber Kettle Club Forums
Grill Talk => Gas Grills & Electric Kettles => Topic started by: cossack joe on March 04, 2019, 04:55:35 PM
-
Hello everyone. I'm looking to pick up some new parts. I definitely need a new tube in which the gas flows. The first of 3 lights automatically, but then the other two take a while to light. Also, my front door blew off during a bad storm. The top piece of material is bent, which makes opening the door a process. I can just tear the door off and hold it in my hand.
Any suggestions for the door? Also, I would like to replace the internal tubes. Where should I look for these?
-
Very common to have a spider web inside one of the gas tubes. Remove the burner tubes and use a small wire to clear any possible webs that could be blocking the gas flow.
You didn't specify the year of your E-310. Below are links for the schematics for the three generations of E-310 grills. Once you find the one that matches your grill, you will be able to find the part numbers you need. The parts can be ordered directly through Weber 800-446-1071.
Pre 2009 E-310 (burner controls on left side shelf)
https://www.weber.com/US/en/help/schematics/browse.aspx?model=3721001
2009-2012 E-310 (burner controls on the left side shelf)
https://www.weber.com/US/en/help/schematics/browse.aspx?model=4421001
2013 E-310 (burner controls are on the front panel)
https://www.weber.com/US/en/help/schematics/browse.aspx?model=46510001
-
https://www.fix.com/models/grill/weber/id750227/3721001/
https://www.ereplacementparts.com/weber-3721001-spirit-e310-gas-grill-parts-c-193079_193087_193542.html
If your grill is registered with Weber, you might be able to get these parts at a discounted price, or even FREE!