Weber Kettle Club Forums

Grill Talk => Weber Grill Forum (Grills, Accessories) => Topic started by: Talus on October 08, 2021, 09:59:34 AM

Title: Location of white wire on Performer with assist, pre 2013
Post by: Talus on October 08, 2021, 09:59:34 AM
So I was trying to get my gas assist to work, and pulled the white wire off by mistake.  It broke off with the connector and I can't figure out where it attaches.  I'm talking about the burner tube end, not the end by the regulator.  A picture would be super helpful.  I can't seem to find an exploded view on Weber's site that shows it well.  Thanks!
Title: Re: Location of white wire on Performer with assist, pre 2013
Post by: Easy on October 08, 2021, 02:40:10 PM
Call weber crs for help. Another way is to go to say Ace hardware, a box store and look at the gas tube and wiring locations use your phone and take some photos.


Sent from my SM-G991U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)

Title: Re: Location of white wire on Performer with assist, pre 2013
Post by: michaelmilitello on October 08, 2021, 03:07:13 PM
(https://uploads.tapatalk-cdn.com/20211008/54559331954b6f29ab7810efac6774f7.jpg)
(https://uploads.tapatalk-cdn.com/20211008/95bfc788aeea1d0297589c18cd8f672c.jpg)


Sent from my iPhone using Tapatalk
Title: Re: Location of white wire on Performer with assist, pre 2013
Post by: RRRanger99 on October 08, 2021, 03:12:30 PM
https://www.weber.com/US/en/accessories/accessories-by-grill-type/charcoal-replacement-parts/burner-tube-kit/10469.html
Title: Re: Location of white wire on Performer with assist, pre 2013
Post by: reynolmm on October 08, 2021, 07:51:05 PM
The white wire connects to the screw mount that holds the ignitor to the burner tube.


Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Location of white wire on Performer with assist, pre 2013
Post by: pbe gummi bear on October 09, 2021, 10:35:21 AM
Quote from: reynolmm on October 08, 2021, 07:51:05 PM
The white wire connects to the screw mount that holds the ignitor to the burner tube.


Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)

I wouldn’t bother replacing that wire. I’d just strip the end and slip it between the burner tube/screw/ igniter tab.