News:

SMF - Just Installed!

Main Menu

Help, painting procedure for SSP frame

Started by NEOSH, October 17, 2024, 09:19:16 AM

Previous topic - Next topic

NEOSH

I just got a Blue 2004 SSP and need some information on painting the frame. I have taken the frame apart ordered new star nuts for the bottom cross members and new wheels but I am not a painter and have always joked with the wife that I am allergic to paint. I know to remove all rust spots and there is very little and what is there is only surface rust. So here are my questions.
1. After all rust removal do you reassemble before or after painting?
2. What grit of sand paper for final sanding before paint?
3. Do you prime the whole frame or only bare metal. Also what type of primer should be used?
4. Also will this procedure work for the ash pot and 5lb tank.
5. Finally do you need to use high heat paint for the frame.

Thanks for any and all information

swamprb

I cook on: Backwoods Gater, Lang 36, Hunsaker Smokers, Pellet Pro 22" WSM, BGE's, WSM's, Cajun Bandits, PK Grills, Drum Smokers, Genesis Silver C, Weber Q's, Cookshack 008, Little Chief, La Caja China #2, Lodge Sportsman...oh yeah! Weber Kettles! Kamado restoration and pit modification hack!

Stoneage

I'd spray before re-assembly. Otherwise you're inviting rust in the places most likely to be affected by it.
I'd go with high heat,resistance something like car engine or header paints.
You don't want super fine sanding, there needs to be some roughness, called "Key" to the metal to give the primer something to "grab on to"