News:

SMF - Just Installed!

Main Menu

Blackstone and IR Thermometer

Started by dirtfishingman, February 24, 2023, 08:10:06 PM

Previous topic - Next topic

dirtfishingman

I got a blackstone griddle this week. I got kinda a tech question... figured someone would know. with an ir thermometer what emissivity setting would a blackstone griddle be?

Sent from my SM-G998U using Tapatalk


Chesapeake Weber

Not 100%.  I use one for my wood stove, but it isn't adjustable. 

Did find this on thermoworks website: https://www.thermoworks.com/emissivity-table/

Also this:  https://blog.thermoworks.com/thermometer/how-to-use-an-infrared-thermometer/

Hopefully they help a bit. What I gather from these resources is that the color and reflectivity play a part in your measurements with the IR gun and you can adjust (assuming an adjustable model) you temp reading by an emmisvity reading (which you knows!).

From you cookin' pic, your gun should read "ready to cook buddy, gimme some more!"


Sent from my iPhone using Weber Kettle Club

dirtfishingman

Thanks bro I'll read though it

Sent from my SM-G998U using Tapatalk


Jules V.

For acurate surface temperature reading, you need to adjust the emmisivity to the specific material/color you're aiming it at.
I typically use a surface temp probe to verify the correct emmisivity setting. 

dirtfishingman

I know but I don't know what to set it at

Sent from my SM-G998U using Tapatalk


Jules V.

Apply a thin layer of cooking oil on the cook top and set the emissivity to 0.95.  Same emissivity setting if you're deep frying and want to check the oil temperature.