News:

SMF - Just Installed!

Main Menu

SOCKET REPAIR

Started by ellatino210, May 17, 2018, 08:49:24 AM

Previous topic - Next topic

ellatino210

If you look at some of my previous posts. I refurbished a 1997 model kettle grill. Well if I knew then what I know now I would have stuck to the using Weber replacement parts.
I so needed to repair the leg sockets on my grill. I saw a video but I used different drill bit. I ended up using a Triangle Shank Step Down Drill Bit. The bit easily went through the socket. Anyway take a look a the pictures attached and hopefully this helps you in any upcoming repairs.


Sent from my SM-G960U using Weber Kettle Club mobile app

A TODA MADRE O UN DESMADRE

jcnaz

That looks like it will hold for a long time.
A bunch of black kettles
-JC

BabelBBQ

Are there replacement leg sockets?

Sent from my Pixel 3 XL using Tapatalk


ReanimatedRobot

He likely cleaned up the sockets that were on the existing bowl and reattached them with bolts, washers, and nuts.  He could have also found a donor kettle to do this.

It is a fairly common repair for vintage kettles and is the preferred method.  Some have tried to do weld repairs, but usually the kettle has to be in exeptionally bad shape.  Plus you need a welder who is precise or the heat will actually cause more porcelain loss. 
Quote from: BabelBBQ on July 18, 2020, 06:09:06 PM
Are there replacement leg sockets?

Sent from my Pixel 3 XL using Tapatalk

Sent from my SM-G981U using Weber Kettle Club mobile app

ISO: 18" & 22" Lime, 22" Cado, Plum SSP, Clean & Colored 18" for Midget Mod, and the usual Grails.