Vent Knobs

[Pat G]

I use these little t-handles.  I bought them at Lowe's or HD.

[Hell Fire Grill]

Thats a nice looking mod. Looks easy to do too.

[captjoe06]

Here's a link to purchase the knobs on Amazon-[/font][/size]
https://amzn.to/2KcL5hFProduct descriptionStrength, durability, and heat resistance are some of the benefits of this broad range of phenolic handle. Extremely versatile range of mountings. Female insert machined to suit. Mounting type: female insert. Thread length/depth: 3/8″. Mounting diameter and threads per inch: 1/4-20. Plastic material: thermoset; insert material: brass. Measures 7/8″ diameter by 2-41/64″ height[/font][/size]
https://northeastbbq.com/2018/05/09/weber-go-anywhere-charcoal-grill-vent-knob-mod/

[msp65]

I just used a drawer handle less the a dollar at home depot. Figure I'll let the smoke color it.

Sent from my SAMSUNG-SM-G935A using Weber Kettle Club mobile app

[dbhost]

Hmmm. Intereting idea.... How about this...

3/4" dowel stock, cut to desired length, Center bored 5/16" on a lathe. Let's say desired length is 2.5", center bore should be say 1".
1/4"-20 all thread, cut to 2".
1/4"-20 nuts.
2 part epoxy.

Cut, center bore, and relieve / taper the ends as desired on the lathe.
Apply epoxy to 3/4" of the end of the all thread, so that when inserting into the dowel stock, the gap is filled. Allow it to set.. Once hard set, polish, epoxy and again polish the dowel end so you get a nice finish. You can use CA glue as well...
Drill a 1/4" hole in the tab as you guys show.
Mount the new handle using said nuts. All metal locking nuts are best...

[dbhost]

Here's a link to purchase the knobs on Amazon-[/font][/size]
https://amzn.to/2KcL5hFProduct descriptionStrength, durability, and heat resistance are some of the benefits of this broad range of phenolic handle. Extremely versatile range of mountings. Female insert machined to suit. Mounting type: female insert. Thread length/depth: 3/8″. Mounting diameter and threads per inch: 1/4-20. Plastic material: thermoset; insert material: brass. Measures 7/8″ diameter by 2-41/64″ height[/font][/size]
https://northeastbbq.com/2018/05/09/weber-go-anywhere-charcoal-grill-vent-knob-mod/

Never mind what I said. I LOVE the phenolic handle here. This is sweet!

[LiquidOcelot]

Here's a link to purchase the knobs on Amazon-[/font][/size]
https://amzn.to/2KcL5hFProduct descriptionStrength, durability, and heat resistance are some of the benefits of this broad range of phenolic handle. Extremely versatile range of mountings. Female insert machined to suit. Mounting type: female insert. Thread length/depth: 3/8″. Mounting diameter and threads per inch: 1/4-20. Plastic material: thermoset; insert material: brass. Measures 7/8″ diameter by 2-41/64″ height[/font][/size]
https://northeastbbq.com/2018/05/09/weber-go-anywhere-charcoal-grill-vent-knob-mod/

Never mind what I said. I LOVE the phenolic handle here. This is sweet!

I wish they were wood. I want wood ones to go with the classic wood handle

Sent from my SAMSUNG-SM-G928A using Weber Kettle Club mobile app

[Hell Fire Grill]

Ace has wood balls.

[LiquidOcelot]

Ace has wood balls.

I had some files at work that i robbed the handles from. Going to install them this weekend. Ill post pictures here

Sent from my SAMSUNG-SM-G928A using Weber Kettle Club mobile app

[LiquidOcelot]

Heres my file handle freshly installed on the tailgater

Sent from my SAMSUNG-SM-G928A using Weber Kettle Club mobile app

[PotsieWeber]

I have a pair of tongs by my barbecue.  I just grab a large vent tab in the center of the handle (instead of the food handling end) and use that to turn it. I don't recall if I've tried it on the small vents.  Best part is one pair of tongs can be used on multiple grills & no drilling is required.

[dbhost]

I have a pair of tongs by my barbecue.  I just grab a large vent tab in the center of the handle (instead of the food handling end) and use that to turn it. I don't recall if I've tried it on the small vents.  Best part is one pair of tongs can be used on multiple grills & no drilling is required.

I've been doing that. Problem is my dumb self keeps forgetting and just grabbing those hot as hades vent tabs!

[JEBIV]

I've been doing that. Problem is my dumb self keeps forgetting and just grabbing those hot as hades vent tabs!

I call those Weber Tattoos

[Brain_STL]

Ace has wood balls.

That's what she said.


Sent from my iPhone using Weber Kettle Club mobile app

[Vinnybaggadonuts]

My 25 project this morning...

(I was bored, daughter went back to school today...)


Vinny