Genesis Porcelain Enameled Lids and Wood

[i_rivera90]

Hello All,

I just wanted to know if these lids are interchangeable. I don't know if it is just the color of the lid and the angle in which the photo was taken but the blue lid looks smaller than the other two. Ultimately, I'm trying to get the blue lid on the smaller frame on to either the crimson or black genesis fames with the side burner.



Also, can anyone confirm that this is indeed a Genesis and not a Spirit?

As far as the two larger Gennys with the side burners go, I would prefer to get the one with the wood/Durawood shelves compared to the Thermoset. Is it easy to find Durawood slats and folding shelving?





Any help would be greatly appreciated!

Thanks!

[Bob BQ]

The blue lid is smaller... it fits a 2 burner; the other ones have 3 burners. You would not be able to swap out the bowl with the other 2. Pretty sure the 2 burner is in the Spirit series. @LightningBoldtz might be able to assist with this....

[LightningBoldtz]

All the grills are Genesis, blue one is a Silver A, second and third ones are silver C.

Two burner's and three burner lids are not interchangeable.  Blues are hard to come by.

[Scott Zee]

I have a friend that would love the Blue Silver A lid. Pop off the green lid for blue.

[i_rivera90]

Ok thanks for the feed back everyone.


Sent from my iPhone using Weber Kettle Club

[i_rivera90]

Chances are, this lid wouldn't fit either, would it? Putting this lid on one of the Genesis Silver C's...??

[LightningBoldtz]

I think that lid would fit just fine

[i_rivera90]

Doesn't it look like the top is a less sharp corner..? More curvy, no?


Sent from my iPhone using Weber Kettle Club

[nitis]

The last blue listed should fit any 3 burner genesis. The handle is the only difference

I have silver lids on original 13bar boxes.

That blue is sweet never seen a blue in that configuration


Sent from my iPhone using Weber Kettle Club mobile app

[i_rivera90]

The last blue listed should fit any 3 burner genesis. The handle is the only difference

I have silver lids on original 13bar boxes.

That blue is sweet never seen a blue in that configuration


Sent from my iPhone using Weber Kettle Club mobile app

Would the entire lid assembly have to be swapped or can i use the blue lid with the end caps from the 13 flavor bar models?

[nitis]

As long as it's for a 3 burner it should swap fine


Sent from my iPhone using Weber Kettle Club mobile app