NOT SO Great way to plug damper holes on WSM (for BBQ Guru)

Started by mcgolden, August 20, 2015, 10:32:37 AM

Previous topic - Next topic

TCookHusker

Are the hole diameters the same on the 18.5 as the 22.5?


Sent from my iPhone using Weber Kettle Club mobile app

jdefran


Quote from: TCookHusker on July 03, 2019, 06:56:07 AM
Are the hole diameters the same on the 18.5 as the 22.5?


Sent from my iPhone using Weber Kettle Club mobile app
Yes they're the same. At one point I lost a cap on the 22" and borrowed one from the 18"


Sent from my iPhone using Weber Kettle Club mobile app

mtneer

Just to add a little more information.

Zinc that isn't galvanized usually has a yellowish/goldish color. But galvanized does have the chalky gray mentioned above.

Also, austenitic stainless steel (aka 300 series) has nickel in it's chemical composition. Out helps with high temps and oxidation resistance.

The cheaper, magnetic, ferritic stainless steel (400 series) didn't have nickel... Or very little.  Also it will rust especially after exposed to high heat regularly. This is why stainless steel used in cheaper grills still rusts out.

If I've started anything incorrectly feel free to correct me.

Sent from my Pixel 3 using Weber Kettle Club mobile app


FTTH

Your grates are nickel plated


Sent from my iPhone using Tapatalk